Calcium and alkalinity supplements formulated for nano reefs and smaller reef systems. Easy-to-use, 2-part liquid system simplifies reef supplementation vital for healthy coral and invertebrate growth. Provides all important major, minor, and trace elements in proper ratios while increasing alkalinity and maintaining proper pH. Minimizes overdose or adverse chemical reactions. Each 8 oz bottle treats 475 gallons.

NanoReef Part A


General Information
NanoReef Part A contains calcium, magnesium, strontium, iron, and many other important elements. When used with NanoReef Part B, it provides all necessary major, minor, and trace ions in proper ratios to maintain proper water parameters in nano reefs and other small reef systems. Free of phosphate and other undesirable substances.

Active Ingredients
Salts of calcium, magnesium, potassium, strontium, rubidium, iron, zinc, manganese, nickel, cobalt, cesium, chromium; trace minerals.

Directions for Use
NanoReef Part A: Add 1 ml (8 drops) per 4 gallons tank capacity daily to maintain proper water parameters. Add directly to the system in an area of good water movement. Wait 5 minutes, then add Part B. Do not mix with other supplements outside of aquarium. Use NanoReef Part B to maintain alkalinity within a range of 7-10 dKH. Use of accurate test kits with these products is highly recommended and will ensure that the concentrations in the aquarium are within the desired ranges.

NanoReef Part B


General Information
NanoReef Part B is an ionically-balanced buffer to NanoReef Part A that increases alkalinity and maintains stable pH. When added at the same dosage as NanoReef Part A, NanoReef Part B provides alkalinity in the same ratio found in natural seawater. It is recommended that accurate test kits be used on a regular basis to ensure water parameters remain consistent within the desired ranges (calcium 420-450 ppm, magnesium 1,300 – 1,350 ppm, strontium 8-10 ppm, alkalinity 7-10 dKH).

Active Ingredients
Salts of carbonate, bicarbonate, bisulfate, sulfate, tetraborate and iodide; trace minerals.

Directions for Use
NanoReef Part B: Add 1 ml (8 drops) per 4 gallons tank capacity daily to maintain proper water parameters. Add directly to the system in an area of good water movement. Wait 5 minutes after adding Part A. Do not mix with other supplements outside of aquarium. Use of accurate test kits with these products is highly recommended and will ensure that the concentrations in the aquarium are within the desired ranges.

Note
NanoReef Part B may form some sediment. Shake well before use. If crystals form, product may have been stored below 60 degrees F. If this happens, warm product slowly and shake vigorously.